How to Restart Apple Watch When It’s Not Responsive


If you are stuck on the logo, you will need it to restart apple watch, whether to save the watch’s battery for later or fix minor glitches like a frozen app. So, whether you’re suffering unusual power drain, erratic performance, or want to save your battery for later, you can always turn off your Apple Watch and reboot it. It’s the oldest trick in the troubleshooting book, and yes, it works on the Apple Watch too. Here’s how to turn your watch off regularly and force it to restart if necessary. This works with both the 38mm and 42mm models, though you’ll have to follow slightly different steps. Follow these steps to restart your frozen Apple Watch.

How do I turn Apple Watch off and reset it?

How to restart apple watch, press the button for about 10 seconds. If your watch is frozen, try force-quite it by press and hold the Digital Crown and Side button simultaneously for about 10 seconds. For more help, refer to these articles: How do I turn my Apple Watch on or off? The power button is located on the right side of your watch next to the Volume buttons. To wake your Apple Watch, tap anywhere on its screen or press any of its controls.

After waking up, you can see how much battery life remains by scrolling down to Power Reserve in the Settings app. You can also tell when your Apple Watch needs charging because it displays a red battery icon instead of the standard green one. For more information on how to assess your turn-off apple watch, how long does it take to charge an Apple Watch battery? Apple recommends recharging your watch every night before going to bed.

What does force restart do on Apple Watch?

If your complicate hard reset apple watch is froze, you can use a force restart to try and solve the problem. A force restart doesn’t always work, but it may solve your frozen watch. To do this, press and hold the side button and Digital Crown for 10 seconds until you see the Apple logo. You’ll know it work if you get a message tell you your device has reset. How to Reset Apple Watch with a Restart or Force Restart.

Sometimes apple watch gets stuck or something else happens. For example, you sometimes try to access Siri on the watch screen. Other times when some apps freeze up as well. One of the most common reasons the Apple Watch freezes is Face ID if you haven’t unlocked your watch. While then, Face ID might not recognize your face anymore and might need to reset. After pressing these buttons, it should show the Apple logo before returning to its original screen, where you can swipe up to unlock it.

Is there a reset button on Apple Watch?

There is not a physical reset button for Apple Watch. However, if your watch is stuck or frozen, you can force restart it by press and hold both the side button and Digital Crown simultaneously for at least ten seconds. The screen will then blink off and on with the text Eras all content and settings. You’ll need to enter your passcode when prompt. If your watch won’t turn on or doesn’t respond, try connect it to its charger first. How to turn off apple watch with a Restart or Force Restart – Restart the watch should only use as a last resort. But in some cases, it might necessary.

One such example is when your watch has been entirely unresponsive. It would help if you used a hard reset (or factory data reset) as a last resort. A hard reset is often necessary when your watch has become completely unresponsive. To perform this type of action, press and hold the side button until you see an Erase all content and settings message. You may also need to remove the band from your wrist before performing this operation.

Also Know About: iPhone 14 Pro Max Release Date and Specs Revealed

How to turn off your Apple Watch and reboot it

How do i restart my apple watch? Merely press side button twice, and the screen will flash. You’ll see an image of how you restart apple watch logo on a black background. Let go of the side button and wait for your watch to finish rebooting. Your watch is now ready for use again! A force restart can be helpful if your watch becomes unresponsive. Press and hold the side button and Digital Crown simultaneously until you see the power-off slider in red letters with a white box around it. Drag that slider from left to right until the words OK appear below it.

At this point, release both buttons and let your watch complete its shutdown process. If you have set up your phone with iTunes or iCloud beforehand, restoring your look should take less than five minutes. Alternatively, you can also do a manual restore through the Watch app on your iPhone. To do so, open the Watch app and select General > Reset> Erase All Content and Settings. The next screen should show three options: Restore from Backup, Restore from Latest Backup (if available), or Set Up as New Device. Select whichever option suits your needs.

Is Your Apple Watch Correctly Charging?

The other common reason for apple watch frozen is a low battery. If your clock has been unplugged for more than an hour, it may need a charge. Connect the charger and wait at least 20 minutes before restarting the device. Two ways to continue your Apple Watch: A force restart or a soft reset. To perform a force restart apple watch, simultaneously press both buttons on the right side of the watch until you see the apple logo on the screen. Hold down both buttons on the right side of your watch to perform a soft reset until you see the Apple logo appear on the screen. Release both buttons when you do. How to restart your apple watch with a soft reset or force reset to perform a soft reset.

Can you force restart your Apple Watch

If you cannot reboot your watch by pressing the side button, hold down the side button and Digital Crown for 10 seconds. For restart apple watch, you should also try this if you see a low power mode message or can’t activate Siri. To restart apple watch, press and release the side button on the right-hand side of your watch. As soon as you cast this button, press and hold it for at least ten seconds. Keep holding until you see an Apple logo.

If this doesn’t work, try again. Make sure that you continue to hold the buttons for at least ten seconds. Don’t let go too early! After about 30 seconds, if nothing has happened, turn off your watch by holding down both buttons simultaneously. Make sure that you use caution when turning off your watch because all data will be deleted from it! Now turn it back on again by holding down both buttons until you see an Apple logo.

How to reset your Home Screen layout

If you see a blank screen, try pressing the side button or Digital Crown again. If this doesn’t work, try pressing and holding both buttons for 10 seconds. After that, if the watch is still unresponsive, contact Apple Support or bring your watch to an Apple Store. For more information on how to restart Apple Watch and troubleshoot other issues. How to restart apple watch, All of Your Home Screens sometimes restarting your Apple Watch.

It just isn’t enough—especially if you can get through all three screens but find that some of your apps are entirely frozen. This is where we have a different solution for you—one that will fix everything instead of making them temporarily unfrozen for about five minutes before freezing up again. Now, keep in mind there are two ways to do this—the simple way, which involves syncing your Apple Watch with iTunes, and the slightly-less-simple way, which requires DFU mode but saves all of your data instead of wiping.

How to set your iCloud sync data

Your iCloud sync data is much simpler. All you need to do is go into your iPhone’s settings and tap on iCloud. You’ll see a list of items you can turn off or on and a little red arrow. Tap it, allowing you to turn off all iCloud syncing with just one button. If you don’t want to lose any of your data from apps such as Calendar, Mail, Photos, etc., then choose to Keep Documents & Data, which will only delete things like Notes.

Once everything has been turned off, go back to the watch face by pressing any button. If this doesn’t work, try turning Bluetooth OFF & ON again or rebooting your phone in recovery mode. If none of this work, your battery may be dying, and you should charge it for a few minutes before continuing to use it. How to reset apple watch series 3, To restart your Apple Watch, press and hold the side button simultaneously. The screen will black out while the device restarts.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Most Popular

To Top